Flow meter for oxygen cylinder MSLFW01 | o2 flow meter price

Medical Regulator
Instruction

Medical regulator is used for oxygen breathing in hospital.

1.Mainly component name (Please see overleaf)

2. Mainly function:

① Oxygen flow range: 1~ 10L/ min 1 〜15L/min

® Pressure reducing range: 2.0~3.0kg

@ Relief valve Pressure range: (3.5kg± 0.5kg)

3^ Appliance introduction:

(D Before using, please fill pour clear water into moisture bottle about one third reaching water line site.

(2) DF-2 blind nut straw into bolt head, make the pipe of flow meter square water line.

③ Put off regulator(9), put on oxygen tube switch, so you will see the data from needle position of pressure gauge
(2). At last, straw flow on/off at anti-clockwise according to patients need, adjust switch.

®If patient need oxygen for a long time,cannse nose pipe to help patient absorb oxygen.

® Moisture bottle 
(20) circles at clockwise, adjust
(17) oxygen hole to other site. 
4、Attention point

① Before using the suction, you will check all parts bad or good and clean it by drying cloth.

Pressure gauge
(2), regulator
(3) no oil, otherwise explode.
Clearwater in moisture bottle keeps clean.

® There is adjustable nut(6) in the front of plunder shall be straw at clockwise.

⑤ Relief value(7) 
(15) keeps out of danger.

® Oxygen dosage is decided by doctor.

©After using suction, put off the oxygen tube switch, make rest oxygen out, pressure gage to zero site, last put off flow switch if using again, first put on the oxygen tube switch, avoid exploding.

5^ If you don't understand, plese contact to us.

flow meter for oxygen cylinder
flow meter oxygen cylinder
oxygen cylinder flow meter price
flow meter of oxygen cylinder
flow meter for oxygen cylinder
oxygen flow meter price
o2 flow meter

oxygen flowmeter
flow meter for oxygen cylinder
oxygen flow meter price
o2 flow meter
oxygen flow meter near me
oxygen flowmeter with humidifier bottle
oxygen flow metre
oxygen flow meter with humidifier bottle