Hydrogen Generator MSLBBH059 for sale

MSL series hydrogen Generator adopt the world's
leading PEM/SPE technology to produce Hydrogen gas by
electrolyzing pure water. The key part- PEM electrolyzer ,
use the imported PEM membrane from Dupont in USA.
Long time service and low maintenance cost.
Our product also has several safety protection in order to
use safety.
1, Water short alarm -Even if the customer forget adding
water in time, the whole machine will alarm and display “fill
water” in the screen , and the same time automatically stop
working.
2,Water Full alarm. If customer add too much water ,it will
alarm.
3,Overheat Protection : automatically cut off when the
electrolyzer works abnormally and the temperature is over
60℃.
4,Unbalance Alarm: automatically cut off once the machine
is tipped over.

Advantages

Can be used continuously or intermittently
with stable gas production

Inject distilled water or purified water,
which is safe and clean.

No need to add any electrolyte or
electrolyte.

Long product life and low maintenance
costs

Safe and convenient, automatic control
and simple operation.

Hydrogen Generator
Operation manual
1. Plug in 100-240V power supply. The display panel indicates
"water short" .

2. Unscrew the lid and add purified or ditiled water (tds≤10).
After“di di" sounds , it means that it arrives the high water
line.

3. Select the Timer button to adjust the hydrogen production
time.
4. Add a lttle water into the humidifier bottle at the front of the
hydrogen outlet.

5. Press the“ON/OFF" button , H2 gas will be outlet from H2
outlet .

6. For transportation, drain the water inside the machine. Block
the drain. When draining water,Must be sure to drain it clean.

7. After the machine running is finished, if not necessary to use
it again, the machine will stop by itself after 30 minutes.

Attention Precautions

1. Keep away from fire (no smoking when breathing).

2. During the transportation, it is forbidden to stand upside
down. If need to transport it, empty the water in the water
tank to avoid damage to the machine.

3. When using the machine, you need replace the water every
one weeks. If not use the machine for long time, you need
replace the water every one month. Forbidden to add the tap
water and mineral water. Or else, Cause damage to the
machine and bear the loss yourself.

4. After hydrogen absorption is completed, please unplug the
breathing tube in time , after breathing H2 gas several times
or after a long period of hydrogen breathing. Water droplets
are generated in the tube. Dry the water droplets and place
them in a dry and ventilated place. If you need to reuse the
hydrogen suction tube next time, please sterilize with alcohol
before use

5. During use, it is forbidden to tilt the machine,the shaking
water in the tank can cause downtime.

Product Parameters

Name : Hydrogen Generator

Voltage: AC100-240v 50-60hz
Model:
MSL BBH059

Power:
<150w
<250w

H2 Flow: | 300m/min
600m/min

H2 Purity: >99.9%

Dimension:30()*21(W)*31(H)cm

Water quality:
Purified or disilled water