Radiographic Contrast Media Injector Control Machine MSLGT04

Specification

Injector Arm and Pedestal：
Dimension:
Length: 22.5″(57.2cm)    
Width: 22.5″(57.2cm)    
Height: 50.2″(127.5cm)
Weight: 14 kg

Console    Dimension:  
Length:  4.55″(11.55cm)    
Width:  12.68″(31.8cm)  
Height: 9.77″(24.81cm)
Weight: 4.1 Kg
Color Touch Screen

Main Control Box：
Dimension:    
Length:    16.2 ″ (41.2cm)    
Width:    7.4 ″ (18.8cm) 
Height:10.0″( 25.3cm)
Weight: 7.2 Kg

Electrical Requirements:    
Arm Controller: Either electric network or battery Electric network: a.c.198~242V, 50/60 Hz, 200VA Battery: 8Ah Lithium polymer battery
Console: Input DC12V, 2A

Operation Interface：
Selectable in English, French, German and Chinese

Flow Rate：
0.1 ml/sec. to 10 ml/sec. in 0.1 ml/sec. increments

Syringe Capacity：
65ml

Volume：
0.1 ml to syringe capacity in 0.1 ml increments

Pressure Limit:
350psi (2415kPa) factory set

Injection    or Scan Delay:
0 to 3599 seconds in 1 sec. increments

Autofill:
Settable flow rate from 3ml/sec. to 8ml/sec., in 0.1 ml increments,
volume from 10ml to syringe capability

Injection Capabilities:
Settable up to 8 phases

Pause Phase:
0~999 sec. in 1 sec. increments

Hold Capability:
More than 30 minutes.

Storage Capabilities:    
100 protocols

Expel air locked:
Unable to inject unless expelling air
 
Test injection:
Settable flow rate from 0.1ml/sec. to 5ml/sec., in 0.1 ml increments, volume from 0.1ml to 10ml

KVO:
Independent KVO program

Heat maintainer:
35~38℃ (optional)

Hand switch:
Hand switch control pause and continue injection

Emergency stop function：
When the system is injecting, click on any point of the touch screen or any button on the injector arm, the system will stop injection