MSLEK23 Technical parameter
Six output modes:
Mono cut    Cutting: 400W (load 500)
    Blend:  200 W (load 500)
    Blend:    150W (load 500)
Mono Coag    Soft Coag:  120W (load 500)
    Strong Coag:  100W (Load 500)
Bioplar    Bipolar Coag: 70W  (load 200)

The characteristics of each function:
1. Cutting: pure cutting, its effect is fine cutting, tissue surface fresh without scab;

2. Mixed cutting 1: The effect is slight coagulation effect in cutting.

3. Mixed cutting 2: The effect is to provide powerful coagulation effect while cutting.

4. Electrocoagulation 1: It can be called soft electrocoagulation or point coagulation. It has a relatively deep coagulation layer and a relatively small scope of action. It can be used with endoscopy.

5. Electrocoagulation 2: It can be called strong electrocoagulation, also known as surface coagulation, relatively fast coagulation, larger area of action;

6. Bipolar electrocoagulation 2: It can be called fine bipolar electrocoagulation. It can quickly achieve the effect of coagulation at the start-up time, automatically cut off the power output during tissue coagulation, achieve excellent coagulation effect, and effectively prevent tissue adhesion.

Product advantages:
1.With memory function, the power set value of the last use appears when restarting the boot.

2.With a neutral electrode contact quality monitoring circuit, it can detect the contact area between the plate and the patient, and systematically detect and evaluate the effective contact area between the plate and the skin. Once the contact area is found to drop to a dangerous level, the system automatically cuts off the output and gives an alarm prompt. It can detect the use of unipolar and bipolar negative plates.

3.It has the function of automatic compensation, stable output power and minimal loss.

4.It can be used for underwater cutting, including tissue cutting in fat-rich areas.

5.It can be used with argon system, endoscopy, hysteroscopy, etc.
Technical parameters:
1. Environmental temperature range: 5 C~40 C; 2. Relative humidity range: <80;

3. Atmospheric pressure range: 86.0-106.0 kpa; 4. Power supply: 220V (+22V), 50Hz (+1);

5. Working frequency: 360-460 kHz; 6. Rated power of equipment: 880 VA+10%;

7. Type of equipment: CF

The power consumption of the whole machine is less than 1000VA. (Cutting function 300)

Transport and storage:
(a)ambient temperature range: - 40 55 C; 
(b)relative humidity range: < 93%;
(c) atmospheric pressure range: 500 hPa to 1060 hpa;
Applicable departments
Operation room    
Gynecologic gynecology    
Department of orthopedics            
Pediatrics         
Endoscopy room            
Surgery            
Burn department            
Urology department            
Department of Internal Medicine             
Clinical and college biochemical laboratory, etc            
Scope of application: Suitable for cutting and coagulation of tissues in operation. Its precise power control technology can meet various surgical needs.

Packing list
Electrosurgical pencil    5pieces 
Neutral electrode    10 pieces 
Neutral electrode cable    1piece 
Foot switch    1set  
Bipolar tweezers with cable    1set  
Power cord     1piece  
F3AL250V（3A）Fuse    2pieces 
User manual（Warranty card）    1book  
Certificate    1copy