Functions new upgrade：

1.High concentration
2.Continuous oxygen supply
3.Oil free compressor
4.Intelligent touch
5.Large screen display
6.Double oxygen inhalation
7.Voice prompt
8.Noise reduction design
9.Imported molecular sieve
10.Filtration systems
11.Save electricity and save energy

Product parameters
Product net weight: 6kg
Oxygen output: 1L-7L
Running noise≤ 60db
The input power≤ 120VA
Oxygen concentrations: 35-93%
Product size: 27*20*39cm
The rated voltage: AC220+15V 50 + 1HZ

Precautions for safe use

When using this product, please observe the following safety precautions:
1.Oxygen is a combustion-supporting gas ,it is not allowed to use the oxygen generator in an environment with bright or dark fire source or with flammable or explosive danger. Smoking is strictly prohibited near the oxygen  inhaler.
2.It is not allowed to place the oxygen tube under the bedspread or seat cushion . when there is no oxygen absorption ,turn off the power supply of the oxygen generator.
3.The power supply must meet the requirements for safe use of electricity. if the power supply does not meet the requirements, do not use oxygen generator .
4.Please turn off the power supply and unplug the power plug ,before cleaning ,maintaining or replacing the safety tube of the oxygen generator.
5.Improper use of power cord and plug may cause burns or other electric shock hazards. do not use if the power cord is damaged . To avoid danger, it must be replaced by a professional authorized by the manufacturer .Unplug the power plug.
6.Please select safe and qualified socket and wiring board with safety electrician.
7.It is forbidden to plug in or unplug the power supply with wet hands . It is forbidden to drag the machine through the traction oxygen absorption pipe or power line. 
8.Personnel not authorized by the company shall not remove the cover for maintenance.

Use environment
Ambient temperature:  10 ℃ ~ 40 ℃
Product Features
The MSLZY30 household oxygen generator is one of the series of products produced by our company. The product uses molecular sieve as the adsorbent, uses the advanced pressure swing adsorption (PSA) principle, and uses air as the raw material to produce oxygen through physical means. The following features:
1) The air is taken from nature.
2) Adopt advanced pressure swing adsorption technology (PSA), advanced process flow and low energy consumption.
3) The product has a novel shape design, simple operation, stable operation and convenient maintenance.

Relative humidity: 30% ~ 75%
Atmospheric pressure: 86.0kPa ~ 106.0kPa 
220 -240V（+5/-10V）
Power frequency: 50Hz ± 1Hz

Working conditions
Impurities in raw air  ≤ 0.3 mg / cm 3
Oil content in the air  ≤ 0.01 ppm
The surrounding environment should be free of corrosive gases and strong magnetic fields

Product Features: 
Display mode: digital tube display, English characters
Timing function continuous running timing, timing running timing, automatic  cumulative timing

Atomization function: 
Remote control function: infrared remote control operation

Technical indicators: 

Oxygen concentration: （when the flow≤1  liter）  90 ± 3% (v / v)
Carbon dioxide content  ≤0.01% (v / v)
Smell      Odorless
Particle size of solid matter  ≤10um
Solid matter content  ≤0.5mg / m 3

Product technical indicators:
Adjustment range  (1 ~ 7 L / min) adjustable
Running noise  ≤60dB (A)
Timer error   ≤ ± 3%
Input power : 150W
Machine weight about: 6kg
Outline size : 390 × 270 × 200 mm

Installation

1) Before use,loosen (or draw out) the bottom Velcro strap to avoid the air compressor working in a vibration state.
2) Add water to the humidifier: Turn off the power of the oxygen generator, put your fingers on the fingers of the humidifier, and gently pull out the humidifier. Pull out the water-filled silicone plug on the humidifier, The water injection funnel delivered is inserted into the water injection hole, and an appropriate amount of pure water is poured into the humidification cup through the funnel (the liquid level should not exceed the highest water level line). Take out the funnel, plug the water injection silicone plug at the water injection hole, and then insert the humidification cup Back